Use List Security options to determine whether you want a list to be moderated or unmoderated as well as to determine who has access to the list.
Allowed Posting By. Select users that can post to the list.
Anyone. Select to let anyone with an email account post mail to a list.
Subscribers. Select to let only the list subscribers post mail to a list.
Moderators. Select to let only the list owner post mail. Moderator is used when you want the list owner to review all messages before they are posted to the list.
Select the options you want to use:
Allow List Unsubscribes Based on Subject Line. Select this option if you want the list-server mailing list to also accept an Unsubscribe command specified in the message Subject line. When users want to unsubscribe from the list-server mailing list, most list servers expect the Unsubscribe command to be specified in the body of mail message.
When selected, the list-server mailing list will accept the following commands in the Subject line to unsubscribe to a list: unsubscribe, remove, signoff.
Important: If the list requires a password, passwords are case-sensitive and there must be no leading spaces after the password. See example below.
Example:
The following example assumes there is a list named beer that allows unsubscribes based on the Subject line on an email domain named domain A term that refers to the subdivisions of the Internet. Domain can mean the major subdivision of which your network is a part, (.com, .edu, .gov, .net, .us, .uk), or it can refer to your part of the network, as in Ipswitch.com. See also Domain Name System..com In DOS systems, the name of a serial communications port In TCP/IP and UDP networks, a port is an endpoint to a logical connection and the way a client program specifies a specific server program on a computer in a network. Some ports have numbers that are preassigned to them by the IANA, and these are known as well-known ports (specified in RFC 1700). Port numbers range from 0 to 65536, but only ports numbers 0 to 1024 are reserved for privileged services and designated as well-known ports. This list of well-known port numbers specifies the port used by the server process as its contact port.. DOS supports four serial ports: COM1, COM2, COM3, and COM4. However, most software uses system interrupts to access the serial ports, and there are only two IRQ lines reserved. This means that the four COM ports share the same two IRQ lines. Typically, COM1 and COM3 use IRQ4, while COM2 and COM4 use IRQ3. So in general, if you have two devices, one of which is attached to COM1 and the other to COM3, you cannot use them simultaneously.port . DOS supports four serial ports: COM1, COM2, COM3, and COM4. However, most software uses system interrupts to access the serial ports, and there are only two IRQ lines reserved. This means that the four COM ports share the same two IRQ lines. Typically, COM1 and COM3 use IRQ4, while COM2 and COM4 use IRQ3. So in general, if you have two devices, one of which is attached to COM1 and the other to COM3, you cannot use them simultaneously..
To unsubscribe from the list:
TO: imailsrv@domain A term that refers to the subdivisions of the Internet. Domain can mean the major subdivision of which your network is a part, (.com, .edu, .gov, .net, .us, .uk), or it can refer to your part of the network, as in Ipswitch.com. See also Domain Name System..com
Subject:Unsubscribe beer
Disallow Subscription (ie: Private List). Select to reject subscribe requests to a list. List subscribers can only be added one of the following ways:
List administrator using IMail Administrator to edit the Users file.
List administrator using IMail Web Messaging to change user list permissions.
Note: Unsubscribe requests cannot be disabled.
Disable List Command. Select if you do not want users to receive a list of the subscribers to your list-server mailing list. If not selected, users can obtain a list of the users subscribed to a list by addressing a message to the list server A server is a program running on a networked computer that processes requests from a client A client is a program running on a networked computer that requests services from a server program, which is usually running on another networked computer. The client communicates with the server using a protocol. For example, an FTP client communicates with an FTP server using the FTP protocol. program, which is usually running on another networked computer. The client and server communicate using a protocol A set of rules that defines how computers will exchange information.. For example, an FTP FTP stands for File Transfer Protocol. This is one of the standard protocols defined for use on a TCP/ IP network and used to transfer files between systems. client communicates with an FTP server using an FTP protocol.client program, which is usually running on another networked computer. The client and server communicate using a protocol . For example, an FTP client communicates with an FTP server using an FTP protocol. (for example, imailsrv@domain A term that refers to the subdivisions of the Internet. Domain can mean the major subdivision of which your network is a part, (.com, .edu, .gov, .net, .us, .uk), or it can refer to your part of the network, as in Ipswitch.com. See also Domain Name System..com In DOS systems, the name of a serial communications port In TCP/IP and UDP networks, a port is an endpoint to a logical connection and the way a client program specifies a specific server program on a computer in a network. Some ports have numbers that are preassigned to them by the IANA, and these are known as well-known ports (specified in RFC 1700). Port numbers range from 0 to 65536, but only ports numbers 0 to 1024 are reserved for privileged services and designated as well-known ports. This list of well-known port numbers specifies the port used by the server process as its contact port.. DOS supports four serial ports: COM1, COM2, COM3, and COM4. However, most software uses system interrupts to access the serial ports, and there are only two IRQ lines reserved. This means that the four COM ports share the same two IRQ lines. Typically, COM1 and COM3 use IRQ4, while COM2 and COM4 use IRQ3. So in general, if you have two devices, one of which is attached to COM1 and the other to COM3, you cannot use them simultaneously.port . DOS supports four serial ports: COM1, COM2, COM3, and COM4. However, most software uses system interrupts to access the serial ports, and there are only two IRQ lines reserved. This means that the four COM ports share the same two IRQ lines. Typically, COM1 and COM3 use IRQ4, while COM2 and COM4 use IRQ3. So in general, if you have two devices, one of which is attached to COM1 and the other to COM3, you cannot use them simultaneously.) and issuing the list [listname] command in the body of the message.
Note: List owners can always receive a list of subscribers regardless of whether the Disable List Command option is selected and regardless of the list type.
Enable Posters List. Select to let any user with an email address in the posters' list can post to a list regardless of the type of list. If the Use Password option is enabled, users in the posters' list must enter a password. The posters' list is stored in a file named POSTERS.LST located in IMail Top Directory\Lists\listname.
Use Password. Select to require a person to use a password before posting to the list. The password must be the first entry in the message Subject field. The password must be enclosed in brackets and colons. For example, Subject:[:password:]Unsubscribe beer
The Use Password setting affects different list types as follows:
If Use Password is selected for an anyone list (open), all posters are required to enter a password to post to the list.
If Use Password is selected for a subscriber list, the subscribers are required to enter a password to post the list.
If Use Password is selected for a moderated list, the moderator is required to enter a password to post to the list.
Posters File. Click this link to view, modify, or enter an email address for users that can post messages to the selected list.
Kill File. Click this link to view, modify, or enter an email address for users that are no allowed to post messages to the selected list.
Save. Click Save to apply changes.
Cancel. Click Cancel to exit without saving changes.